skip navigation
banner

This level sections

Overview
Failure analysis
BGA inspection
RoHS Assurance & Screening
China RoHS
General troubleshooting
Case studies

Top level sections

Home
About us
News
Services
Information
Membership

Site Links

Site Map
Login
List of Access Keys
Terms and Conditions
Email the site administrator
Standard Page

Home | Services | Service

Thermal Chamber Capabilities

General Ovens

CamLab Carbolite
Internal dimensions – 40 x 40 x 40cm
Max Temp 550ºC
This oven is programmable to allow different profiles, with ramp rates and dwell times, etc.

CamLab Venticell
Internal dimensions – 37 x 35 x 40cm
Max Temp 250ºC

Two smaller ovens
Internal dimensions – 30 x 30 x 35cm
Max Temp 250ºC

Specialised Furnaces

Lenton Tube Furnace
Internal dimensions – 8cm diameter tube, heating length approx 90cm
Max Temp 1600ºC
This oven is programmable to allow different profiles, with ramp rates and dwell times, etc. Heating can be performed under a controlled gaseous atmosphere, e.g. hydrogen.

Lenton Chamber Furnace
Internal dimensions without retort – 20 x 20 x 36cm
Max Temp 1300ºC
Internal dimensions with – 15 x 15 x 30cm Max Temp 1050ºC

This oven is programmable to allow different profiles, with ramp rates and dwell times, etc. The use of the retort allows heating to be performed under a controlled gaseous atmosphere, e.g. hydrogen.

Cheltenham Induction Heating Induction Furnace
Internal dimensions – Crucible size (8?)
Max Temp 2000ºC+

Environmental Testing

Thermotron SE600
600l capacity
Temperature range - -70 to +180ºC +/- 3ºC
10 – 98% Relative Humidity (dependant on temperature)
Used for temperature/ humidity tests and thermal cycling. Can be used as a very large oven.

Thermotron SE300
300l capacity
Temperature range - -70 to +180ºC +/- 3ºC
This oven has a LN2 boost for achieving thermal shock, but it has never been tested and we don’t have the equipment necessary to hook it up.

Anatech Event Detectors
We have four units which can monitor up to 256 channels each. These are generally used in conjunction with a daisy chained trial board to monitor when banks of particular components fall over.

ESPEC PR-2KP
225l capacity
Temperature range - -20 to +100ºC
20 to 98% Relative Humidity
Used for temperature/ humidity tests and thermal cycling. Principal use is for SIR testing.

Soldertec Members receive preferential access to our laboratory services at a discounted rate.

Call us today to discuss your individual problems.
Contact:
Zoe Sullivan on +44-1727-871 307 or zoe.sullivan@itri.co.uk
Switchboard +44-1727-875 544




Back to navigation